How To Record A Session - Keysight A Series User Manual

Interference Analyzer (SA Mode) – Option 236
Record/Playback (SA Option)
Screen Annotation
During a record or playback session, the following is displayed in the top-left
area of the screen:
—
where:
—
—
—
—
— Sep.22... is the date and time of recording.
When GPS is enabled`, the current location and elevation are annotated at the
bottom of the playback display. Learn more in
page
If Recording or Playback is not occurring when you think it should, check
the following:
— Is the sweep in HOLD? (upper-left annotation)
— Is Recording or Playback Paused? (mid-left annotation)
— Is the Record or Playback Interval set too long? (Configuration settings.)

How to Record a Session

— Press Trace 6
— Then
— SA Only: Optionally set resolution (points). Learn how in
— Then either:
— Then
— Then
Keysight N9927-90020 User's Guide
AutoSession02: 92/95 (state 4/5)_*_
Sep.22.2018 09:15:15 AM
AutoSession is an auto-generated name for sessions.
auto-generated number, incremented with each new session. The name
can be changed using Manage Sessions. Learn more in
on page 529.
92/95 is the current and total trace number: currently trace is 92 of 95 total
traces.
state 4/5 is the current and total state tag or user tag number: 4 of 5 total
tags.
* (Asterisk) indicates that a state has changed.
User Tag has been inserted.
758.
Record Playback
page 212. This can NOT be changed after a session is opened.
— New Session OR
— Recall Session then
Recorder Player
Record
# (Pound) indicates that a
"GNSS (GPS+) and GPS" on
Open and select a session.
02 is the
"Manage Sessions"
"Points" on
523