Keysight A Series User Manual page 247

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
Keysight N9927-90020 User's Guide
b. Use the arrows, the rotary knob, or numeric keypad to select
the table cell value to be edited (i.e., the Frequency Interpolation
value is not editable). Then:
i. Press Edit Antenna
press New
your existing antenna's file (i.e.,
data? is displayed above the table).
— Choose
— Choose
filename is Example).
ii. Press Add Row
Factor values.
iii. Press Delete/Clear
— Delete Row
currently selected row of Frequency and Antenna
Factors (i.e., you must press
to exit the current softkey menu).
— Clear All
currently selected rows of Frequency and Antenna
Factors (i.e., you must press
No
— Back
iv. Press Done
c. Press Save Antenna
Naming Options" on page 752
on page 752.
For more information:
— See also "GNSS (GPS+) and GPS" on page
to edit your existing antenna factors or
to add a a new antenna's factors or to write over
Yes to write over the existing antenna file.
No to create a new antenna file (default
to create additional Frequency and Antenna
then choose one of these:
– when pressed this choice deletes the
– when pressed this choice deletes all of the
to exit the current softkey menu).
– To exit to previous softkey menu.
when finished editing to exit.
to save your changes. See also
and then to
Overwrite existing Antenna
Yes to delete a row or
Yes to deleted the rows or
"File Saving
"Alpha Numeric Editing"
758.
No
247