Keysight A Series User Manual page 421

5G Rapid Prototype Phased Array Antenna – Option 360
How to Set Up Phased Array Antenna Settings
Spectrum information is not recorded. Only the TableChart data are saved.
See
Data Log-Play files are saved to:
Learn more about file settings, refer to
9. Press
10. If recording, then:
Keysight N9927-90020 User's Guide
b. Record Save/Recall
— Save Log File
— Recall Log File
— User Folder Def System
— File Type (Default = KML) CVS or DREC (DREC is only
available with Option 360 only)
— Then Auto Save OFF ON
"How to Record a Data Log" on page
If File Folder is set to Default then Data Log-Play files are
—
save-recalled to:
"[CurrentDevice]\RecordPlayback\PAA"
If File Folders are set to System, then Data Log-Play files are
—
save-recalled to:
"CurrentDevice\<UserSelectedFolder>\
c. Optional: Press Indoor Map Data Logging
— Record Indoor Data
refer to Chapter 16
on page 484.
Back to return to previous menu.
— Pause Resume Temporarily halts recording until pressed again. The
incoming trace continues to sweep. Press again to continue
recording.
— Stop Immediately
— The Save the log file menu opens. Edit the filename and
press Done to exit menu. See Settings below and
change Data Logging Configuration settings:" on
page 438.
— To change your file settings or measurement interval.
Learn more, refer to
Configuration settings:" on page
— (Press Record to begin a new recording.)
(If you have previously stored data recordings.)
or
or
(Default = Default) or
(Default = OFF).
438.
Chapter 32, "File Management."
or Recall Indoor Log
Mapping and "Setting up Data Logging"
"To change Data Logging
then
File. Learn more,
"To
438.
421