Using The Antenna/Cable Editor - Keysight N9912A User Manual

SA (Spectrum Analyzer) Mode
SA Mode Settings
The following menu appears when any of the above Antenna or Cable softkeys
are pressed:
— Antenna/Cable ON OFF
— Ed it Antenna/Cable
Antenna/Cable Editor (below) for more information.
— New
(below) for more information.
— Save Antenna/Cable
specified Storage Device.
— Recall Antenna/Cable
specified Storage Device.
— Storage Device
selections in
When finished, press Back to return to the previous menu.

Using the Antenna/Cable Editor

The Antenna Editor and the Cable Editor menus are very similar. Both tables
include header information, and a Frequency/Value table.
The FieldFox limits Antenna and Cable correction to a maximum of 10001
values.
Keysight N9912-90001 User's Guide
— SrcSide Antenna Off / On
transmit.
— RcvrSide Antenna Off / On
receive.
— SrcSide Cable Off / On
Source side.
— RcvrSide Cable Off / On
Receiver side.
— View Corrections ON OFF
Antenna/Cable corrections. This is a composite of all cable/antenna
corrections that are currently applied. Available as a useful visual aid,
the zero "dB" level (no net correction) is mapped to appear at the -50
dBm on-screen level.
Turn correction ON or OFF for this Antenna/Cable.
Edit an Antenna/Cable Correction table. See Using the
Create a new Antenna/Cable. See Using the Antenna/Cable Editor
Save the modified Antenna/Cable to a file on the
Read an existing Antenna/Cable file from the
Choose from: Internal, USB, SD. Learn more about these
"Set File Type and Select Device" on page
Edit/Recall an Antenna file to be used to
Edit/Recall an Antenna file to be used to
Edit/Recall a Cable file to be used on the
Edit/Recall a Cable file to be used on the
Turn ON and OFF Pink Trace -
17-5.
8- 13