Table of Contents
Advertisement
General Product Information
Analyzer Options
Analyzer Options
Below is a list of options available for the FieldFox N9923A. Additional options
may be added as product features are enhanced. Go to
www.keysight.com/find/fieldfox2
upgrade options.
The base model for the N9923A includes option 104.
Frequency Range Options
Option 104, 2 MHz to 4 GHz Frequency Range
This option allows you to make measurements in the 2 MHz to 4 GHz frequency
range.
Option 106, 2 MHz to 6 GHz Frequency Range
This option allows you to make measurements in the 2 MHz to 6 GHz frequency
range.
Network Analyzer (NA) Options
Option 122, Full 2-Port S-Parameters
The standard vector network analyzer allows you to make S11 and S21
measurements. Option 122 allows you to make S11, S12, S21, S22, A, B, R1,
and R2 measurements.
Option 112, QuickCal
This option provides a calibration that is performed automatically using
calibration standards that are built-in to the N9923A. Calibration standards are
automatically switched in as needed. QuickCal is ideal for making quick DTF
and cable loss measurements without taking the time to perform a full O,S,L
Cal.
Power Meter (PM) Option
Option 302, Power Meter Mode
This option allows you to use Keysight external USB power sensors to make
power measurements.
Cable and Antenna Test (CAT) Option
Option 305, Cable and Antenna Test Mode
This option allows you to make the following cable and antenna
measurements:
Keysight N9923A Service Guide
for information on currently available
2-3
Advertisement
Table of Contents
Troubleshooting
