Sa Data Recording; Playback Configuration - Keysight A Series User Manual

Interference Analyzer (SA Mode) – Option 236
Record/Playback (SA Option)
Figure 18-2 FieldFox SA Mode: Data Flow and Record Playback Data Points

SA Data Recording:

— Data can be recorded at the Raw Meas block where data is acquired after
— Data can be recorded from Traces 1,2,3, or 4 which includes the trace state
— Recording from a Clear/Write trace yields exactly the same data as
— Data is ALWAYS played back at the same location in the data flow: just after
— See an example using Record Playback with Max Hold traces in

Playback Configuration

By default, trace sweeps are played back as fast as the trace can be drawn on
the screen. The following setting allows you to slow playback. In addition, you
can manually scroll through individual traces using Playback Trace, or scroll
through State and User Tags using Playback State/Tag. Learn more in How to
Playback a Session in
To slow playback of a session:
— Record a new session or Open an existing session.
— Press
— Then
528
ResBW, VideoBW, and Detector processing, but before any trace state
processing.
(Max Hold, Min Hold, and so forth).
recording from the Raw Meas block.
the Raw Meas block, through all currently active Traces, and onto the
display.
Playback Example (SA Only)" on page
"How to Playback a Session" on page
Playback Configuration
Playback Interval
530.
524.
Keysight N9927-90020 User's Guide
"Record