Keysight A Series User Manual page 659

Noise Figure Mode (Option 356 – CPU2 Only)
How to Define a Noise Figure Measurement
Keysight N9927-90020 User's Guide
— ENR Table Edit/Save/Recall
edit, save, or recall noise source values (Not active with
ENR Mode set to Spot).
Then choose:
IMPORTANT! Save your noise source table with a unique filename to avoid
loss of table data. All noise figure files are saved with *.enr type suffixes.
The FieldFox displays Replace existing file?, because the displayed default filename
is the one last saved. Enter a unique filename to avoid loss of table data (i.e., all noise figure files
are saved with *.enr type suffixes).
——More opens additional ENR Spot Value softkey
menu choices
Γ
—— Spec. Style [95th %ile]
softkeys to set the
Then choose Maximum,
%ile, Median, Mean, or Fixed.
Γ
—— Distribution [Rayleigh]
softkeys to set the type of
Then select Rayleigh
in Circle.
——Edit ENR Table Opens the currently selected
table of noise source values (generic default
noise source values are populated for quick
check). Enter your noise source's values for more
accurate measurements.
——New ENR Table opens a new ENR table for
entering and saving additional noise source
values.
——Save ENR Table Opens a menu of softkeys to
enable you to enter a unique noise source
filename.
——Recall ENR Table Opens a menu of file recall
softkeys and displays a list of stored noise source
files.
——Storage Device [Internal]
softkeys to set the storage location for your files.
Then choose Internal
——Back to return to previous menu.
Opens a menu of
Γ
specification style.
95th %ile (default),
Opens a menu of
Γ
distribution.
(default), Fixed, or Uniform
Opens the ENR table menu to
Opens a menu of
(default), SD Card, or USB.
80th
659