Keysight A Series User Manual page 245

SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)
How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option 307), and SA
Mode (Option 233–Mixed Analyzers))
The USB antenna factors stored in the triaxial antenna itself cannot be
overwritten. The antenna factors on FieldFox imported into FieldFox can be
modified. To reset the antenna factors in FieldFox to the original factors,
re-import the antenna factors.
5. Modifying the EMF settings:
Keysight N9927-90020 User's Guide
— Press
Pink Trace - Antenna/Cable corrections. This is a
composite of all cable/antenna corrections that are
currently applied. Available as a useful visual aid, the
zero "dB" level (no net correction) is mapped to appear
at the -50 dBm on-screen level.
— Press
Source and Receiver side measurements.
f. Optional: Example of editing X, Y, and Z axes manually.
— Press X axis Antenna
menus. Then choose one or more of the following:
—
—
—
—
—
—
Press Meas Setup 4 >
— EMF TriAxial [OFF]
measurement (default == OFF).
— Press Scale/ Amptd >
dBm).
— Back to exit to the previous softkey menu.
View Corrections OFF ON
Src/Rcv Split - selecting Src/Rcv Split selects
– opens the X axis Antenna softkey
X axis Antenna – enable/disable the X axis antenna
factors (default is coupled to other settings).
Edit Antenna – to edit the current imported X factor
(if available). Refer to
Factors and Adding New Antenna Factors" on
page 246.
New – to edit/define a new X factor value. Refer to
"Editing Antenna Correction Factors and Adding
New Antenna Factors" on page
Save Antenna – to save either an edited X antenna
factor or a new X antenna factor. See also See also
Chapter 30, "System Settings"
Numeric Editing" on page
Recall Antenna – to recall a stored X antenna factor.
See also Chapter 30, "System Settings."
Storage Device – to select the location to store your
new antenna factor. See also
Settings."
More > EMF Off then
> Sum All disable/enable the EMF tri-axial
More > Unit dBm
to turn ON and OFF
"Editing Antenna Correction
246.
and then to "Alpha
752.
Chapter 30, "System
choose units (default ==
245