Playback Configuration; Manage Sessions - Keysight A Series User Manual

RTSA (Real-Time Spectrum Analyzer) Mode—Option 350 (CPU2 Only)
Record/Playback (RTSA Option)

Playback Configuration

By default, trace sweeps are played back as fast as the trace can be drawn on
the screen. The following setting allows you to slow playback. In addition, you
can manually scroll through individual traces using Playback Trace, or scroll
through State and User Tags using Playback State/Tag. Learn more in How to
Playback a Session in
To slow playback of a session:
1. Record a new session or Open an existing session.
2. Press
3. Press
4. Enter a value in seconds between 0 (no delay) and 100 using the numeric
5. Press

Manage Sessions

1. Press Trace 6 >
2. Press
3. Press
4. Choose from the following:
5. Press
If these are large recordings on a device, it could take several seconds for
the FieldFox to display the list.
6. Choose from the following:
294
"How to Playback a Session" on page
Playback Configuration
Playback Interval
keypad, arrows, or the rotary knob. After using the keypad, select a
multiplier key. Learn about multiplier abbreviations.
Enter
Record Playback
Record Playback Setup
when a session is NOT open.
Storage Device
managed. This is a different setting from the Save/Recall Storage Device
setting.
— Internal FieldFox memory (default)
— SD Card An external SD Card (must be inserted)
— USB An external USB flash drive (must be inserted)
Manage Sessions
— Rename Using the FieldFox labeler, change the name of the session.
AutoSession (n) is the default name where (n) is the next-available
number. Learn more in
page 781.
The following selections are available ONLY
to select the media which stores the sessions to be
"How to use the FieldFox labeler " on
Keysight N9927-90020 User's Guide
291.