File Management
Saving and Recalling Files
Saving and Recalling Files
FieldFox State files are intended to be recalled on the same instrument
model on which they were saved. Sometimes you may able to recall them
within model families. An error will result when trying to recall a state file
that was saved on a different model family.
The FieldFox model families are:
— N991x (VNA/SA) model family
— N992x (VNA) model family
— N993x (SA) model family
— N995x (VNA/SA) model family
— N996x (SA) model family
Save Files
How to Save a File
1. Press Save/Recall 9
2. Then
3. At the top of the current 'labeler' screen (see following image) check the
4. Then use the labeler to specify a filename.
778
Save
File Type to save and Device (Internal, USB, Storage Card) to which the file
is saved. Learn how to change these settings in
Device" on page
784.
"Set File Type and Select
Keysight N9927-90020 User's Guide