Tf Features (Option 377); 5G Tf Has The Following Features - Keysight A Series User Manual

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5GTF
Option 377 (CPU2 Only)
About Over–the–Air (OTA) Measurements
5G TF Features (Option 377)
IMPORTANT! LTE FDD, LTE TDD, and 5GTF only demodulate PSS and SSS
signals using the FieldFox's 10 MHz demodulation path. User data
channels are not demodulated.

5G TF has the following features:

Cell Scan Results:
—
— Physical Cell Information (PCI) – (Cell ID)
— Power (Channel Power) (dBm)
— PSS (Primary Synchronization Signal) (dBm)
— SSS (Secondary Synchronization Signal) (dBm)
— Sync correlation (%)
Data Formats:
User can set up and display 1, 2, 3 or 4 simultaneous measurements of key
performance indicators (KPI's) for any component carrier (CC0 through CC7),
up to 8 carriers, in any combination of the following:
— Table – Cell scan numeric results (for up to 6 cell sites (ID's) including Cell
— Bar Chart – Vertical power bar graph of selectable cell scan result metric
— Spectrum – Magnitude spectrum frequency domain (fixed span). You can
— Strip Chart – Magnitude of selectable cell scan result metric graphed over
356
Center frequency
ID, Channel Power, PSS, SSS, Sync Corr
for up to 8 cell sites with adjustable color "heat" amplitude scale
only view a single component carrier at a time with Spectrum (e.g., CC0 or
CC2, etcetera).
time
Keysight N9927-90020 User's Guide