How To Playback A Session - Keysight A Series User Manual

Interference Analyzer (SA Mode) – Option 236
Record/Playback (SA Option)
REC
During recording, choose from the following:
—
—

How to Playback a Session

— Press Trace 6
— If the session is already open, skip the following step. Otherwise:
— Then
— Then
— Then
PLAY
end of the recording is reached, playback begins again at trace 1 and
continues to loop indefinitely.
During playback, choose from the following:
—
—
524
is displayed in the left of screen graticules.
Pause Resume Temporarily halts recording until pressed again. The
incoming trace continues to sweep. Press again to continue recording.
Stop Immediately stops recording. Then choose from the following:
— Press Play to start replaying the recording from the beginning.
— Press Record to continue recording.
Record Playback Setup
— Press Recall Session
Open.
Recorder Player
Play
is displayed in the left of screen graticules during playback. When the
Pause Resume Temporarily halts playback. Then choose from the
following:
— Pause Resume
— Playback State/Tag
tag, or scroll through the state tags. Enter a value between 1 and the
total number of state tags using the numeric keypad,
the rotary knob. Active when playback is paused. Learn more in
About State and User Tags in
page 522.
— Playback Trace
continue playback from a specific trace, or scroll through traces
manually. Enter a value between 1 and the total number of traces
using the numeric keypad,
Stop Immediately stops playback. Then choose from the following:
— Play Start playback from trace 1.
— Record Resume recording from the last recorded trace.
Then select a session to playback and press
Press to continue playing.
Allows you to continue playback from a state
"About State and User Tags" on
Activated automatically when Paused. Allows you to
arrows, or the rotary knob.
Keysight N9927-90020 User's Guide
arrows, or