Glossary (Ota) - Keysight A Series User Manual

Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5GTF
Option 377 (CPU2 Only)

Glossary (OTA)

Glossary (OTA)

This section provides a description of some of the terms used in the FieldFox's
OTA mode.
Table 13-1 OTA Abbreviations and Descriptions
Abbreviation Description
LTE FDD &
LTE TDD
Center The specified LTE FDD carrier center frequency.
Frequency
C/S/G Physical Cell information (PCI), or Cell ID – C/ S /G
Cell ID (PCI) Physical cell ID – The Primary Sync Signal and Secondary Sync Signal largely define the PCI. PCI is also
referred to sometimes as Cell ID.
PSS PSS (dBm) is the Primary Synchronization signal for an LTE downlink frame.
RSRP Reference Symbol Received Power (dBm)
RSRQ Reference Signal Received Quality (dBm)
RSSI Reference Signal Strength Indicator (dBm)
SINR Signal to Interference & Noise Ratio (dB)
SSS SSS is the Secondary Synchronization signal for an LTE downlink frame (dBm).
Freq Error Th
LTE FDD
Frequency Error value, is not displayed.
5GTF
Center The specified 5GTF carrier center frequency.
Frequency
Cell ID (PCI) Physical cell ID – The Primary Sync Signal and Secondary Sync Signal largely define the PCI. PCI is also
referred to sometimes as Cell ID.
Power (Channel Power) (dBm)
PSS PSS (dBm) is the Primary Synchronization signal for an LTE downlink frame.
SSS SSS is the Secondary Synchronization signal for an 5GTF downlink frame (dBm).
SyncCorr Th 5GTF Synchronization Correlation Threshold (%). Any data with errors that are less than the
Synchronization Correlation Threshold (%) are not displayed.
402
and LTE TDD
Frequency Error Threshold (Hz). Any data that is does not meet the defined
Keysight N9927-90020 User's Guide