To View And Edit The Maximum Number Of Records; Fieldfox Setting Changes During Record And Playback; During Recording - Keysight A Series User Manual

Interference Analyzer (SA Mode) – Option 236
Record/Playback (SA Option)
To maximize the amount of space that is available, save recorded traces to a
USB Flash drive or SD card. Learn how in
You can determine the length of time over which recording can occur by
setting the Record Interval (the time between recorded traces) and other
settings. Learn more in

To view and edit the maximum number of records

Just after opening or initiating a session...
— Press
— Then
—

FieldFox Setting Changes during Record and Playback

During Recording

When any of the following State settings are changed during recording, the
State counter is incremented
the settings are saved to the Session file along with the first trace to be
recorded with the new setting. During playback, the trace and display
annotation will reflect the change on the screen.
State settings:
Refer to
Table 18-1 Summary of SA State Settings
Option
SA
Keysight N9927-90020 User's Guide
"Recording Configuration" on page
Session Data
TraceRecordLimit <n>
recorded).
Clear All Records Empties that session of recorded traces. Learn more in
"Manage Sessions" on page
Table 18-1 for a list of the applicable state settings for the SA option.
Settings
Average Type
Detector(s)
External Gain
Frequency Range
Preamp On/Off
Resolution BW
RF Attenuation
Source Settings
Sweep Acquisition
"Manage Sessions" on page
(n = Max number of traces that can be
529.
("About State and User Tags" on page
529.
525.
522) and
521