N-Wire Type Ie Connection; Ie Connector (Target System Side); Ie Connector Pin Layout Diagram (Target System Side) - Renesas NU85E Preliminary User's Manual

10.5 N-Wire Type IE Connection

In order to connect the N-Wire type IE (IE-70000-MC-NW-A), it is necessary to mount a connector for IE
connection and a connection circuit on the target system.
To host machine
IE-70000-MC-NW-A

10.5.1 IE connector (target system side)

Figure 10-3 shows the pin layout of the IE connector (target system side), and Table 10-2 describes the pin
functions.
Remark The recommended connectors are as follows.
• 8830E-026-170S (product of KEL Corporation): 26-pin straight type
• 8830E-026-170L (product of KEL Corporation): 26-pin right angle type
Figure 10-3. IE Connector Pin Layout Diagram (Target System Side)
244
CHAPTER 10 NB85E901
Figure 10-2. N-Wire Type IE Connection
Connector for IE connection (8830E-026-170S/L)
(product of KEL Corporation)
A13 A12 A11
B13 B12 B11
Preliminary User's Manual A14874EJ3V0UM
Target system
A3 A1 A2
(Top view)
B3 B2 B1