Advertisement
Quick Links
To our customers,
st
On April 1
, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Old Company Name in Catalogs and Other Documents
Renesas Electronics website:
http://www.renesas.com
st
April 1
, 2010
Renesas Electronics Corporation
Advertisement
Related Manuals for Renesas R8C/2D
Summary of Contents for Renesas R8C/2D
- Page 1 On April 1 , 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding.
- Page 2 Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific”...
-
Page 3: Quick Start
9. After the installation the machine’s site code will be shown, this is not important at this stage, click <Next>. 10. Ensure ‘Launch AutoUpdate’ is selected and click <Finish> 11. Configure Auto-Update to finish the installation. Renesas Starter Kit for R8C/2D D007334_11_S01_V02... - Page 4 High-performance Embeded Workshop manual installed on your computer. (Start Menu > All Programs > Renesas > High-performance Embedded Workshop > Manual Navigator) 19. Launch High-performance Embedded Workshop from the Start Menu. (Start Menu > All Programs > Renesas > High-performance Embedded Workshop > High-performance Embedded Workshop) 20.
- Page 5 6. Set the “Communications baud rate” to “500000”. lick <Finish>. ote: The first time the E8a is connected, you may be asked to choose a driver, select “Renesas Communications”, after a few seconds the “Interface” and “Channel” numbers will be automatically displayed, click <Close> on the dialog.
- Page 6 System Tray next to the clock. To change the settings or access Autoupdate simply right-click on the icon and use the menu that appears. © Renesas Solutions Corporation. 2007. © Renesas Technology Corporation. 2007 © Renesas Technology Europe Ltd. 2007. with this RSK is fully functional but time limited. You have 60 days to evaluate www.renesas.com/renesas_starter_kits D007334_11_S01_V02...