Table of Contents
Advertisement
(10) VPRESZ (output)
This is the pin from which reset signals are output to the peripheral macros.
Caution The VPRESZ signal is the reset signal for the peripheral macros in normal operation mode as
well as test mode.
(11) PHTEST (output)
This is the pin from which signals indicating the peripheral test mode status are output.
(12) TMODE1 (output)
This is the test mode selection output pin. When using the RCU, connect this pin to the TMODE1 and TEST
pins of the RCU.
(13) TMODE0, TBREDZ (output)
These are NEC reserved pins. Leave them open.
CHAPTER 2 PIN FUNCTIONS
Preliminary User's Manual A14874EJ3V0UM
45
Advertisement
Table of Contents
