Tip Identification And Slice Height - Stratasys FORTUS 360mc Service Manual

Tip Identification and Slice Height

For Titan and Vantage,
Tip Slice Height information is provided in
FORTUS 360mc/400mc Service Manual
Figure 10-1 provides tip identification information.
Figure 10-1: Titan and Vantage Tip Identification
Standard tip
3.045" (77.34 mm)
T12 WW tip
Table 10-4: Slice Height
Model Tip Slice Height
T10 0.005 inch (0.127 mm)
T12 0.007 inch (0.178 mm)
T16 0.010 inch (0.254 mm)
T20 0.013 inch (0.330 mm)
Table 10-4.
T12 WW tip has
a finned flange
10-8