Display Panel Installation - Stratasys FORTUS 360mc Service Manual

Display Panel Installation

Tools and Materials Required
• Set of basic service tools
• Titan Display Panel assembly as required - 10113301.
• Vantage Display Panel assembly as required - 104447-0001.
Procedure
For Titan: (Figure 10-12 on page
1.
Position Display Panel assembly - install and tighten 4 mounting screws.
2.
Connect interface cable to bottom of Display Panel assembly.
3.
Position right front cover - install and tighten 3 mounting screws.
For Vantage: (Figure 10-13 on page
1.
Position Display Panel assembly - install and tighten 6 mounting nuts.
2.
Connect interface cable to side of Display Panel assembly.
3.
Close/Install right side panels. (See
4.
Power up the system to verify display panel operation. (See
Power Up" on page
FORTUS 360mc/400mc Service Manual
10-28)
10-28)
"Panel Installation" on page
5-8.)
5-7.)
"System Power Down/
10-29