Tips And Slice Height - Stratasys F170 User Manual

TIPS AND SLICE HEIGHT

The F123 Series utilizes a T14 tip for all model and support materials. Tips are a component of the associated
head assembly and cannot be changed individually. Instead, the entire head assembly is replaced as a single
unit.
Table 3-3 lists the types of model material available for use with the printer and their corresponding support
material.
Table 3-4 lists available slice heights.
Table 3-3: Available Material Types
Model Material
ASA
ABS
PLA
PC-ABS
Table 3-4: Slice Height
Model Tip
T14
*Available in "Draft" mode only
Support Material
QSR
QSR
PLA
QSR
Slice Height (in)
0.005
0.007
0.010
0.013
Slice Height (mm)
0.127
0.178
0.254
0.330
36
Material
ABS, ASA, PC-ABS
ABS, ASA, PC-ABS
ABS, ASA, PC-ABS, PLA*
ABS, ASA, PC-ABS