Specifications; System Specifications - Stratasys FORTUS 360mc Service Manual

Specifications

System Specifications

Fortus 360mc/400mc
Envelope Size
Material Bays
Model Materials
Support Structures
Accuracy
Compatibility
Network
Communication
Power Requirements
Size
Weight
Environmental
Requirements
FORTUS 360mc/400mc Service Manual
Linear Compensation _________________________________________ 2-56
14 x 10 x 10 in
355 x 254 x 254 mm
Upgradeable to
16 x 14 x 16 in
406 x 355 x 406 mm
1 model
1 support
Upgradeable to: 2 model, 2 support
Fortus 360mc:
ABS-M30, ASA, PC-ABS, PC, and Nylon 12
Fortus 400mc:
ABS-M30, ASA, Nylon 12, PC-ABS, PC, ABSi, ABS-M30i, PC-ISO, PPSF, and
Ultem* 9085
(Available individually or in any combination)
Water soluble release supports for ABS-M30, ABS-M30i, ABSi, ASA, Nylon 12,
and PC-ABS.
TM
BASS breakaway support for PC-ISO, PPSF, PC and Ultem* 9085.
Models are produced within an accuracy of ± 0.005 inch (± 0.127 mm) up
to 5 inches (127 mm). Accuracy on models greater than 5 inches (127
mm) is ± 0.0015 inch per inch (± 0.0381 mm) per each inch over 5 inches.
Windows NT 4.0, Windows 2000, Windows XP, Windows 7
10/100 base T connection. Ethernet protocol.
230V AC 50/60 Hz, 3 phase, 20A/phase ±5% fluctuation (dedicated circuit
required).
50.25 inches (1277 mm) wide x 35.25 inches (896 mm) deep x 77.25 inches
(2197 mm) high
1600 pounds (726 kg) shipping weight
Maximum Environmental Temperature: 85°F (29°C)
Maximum Dew Point: 78°F (25°C)
2-2