Z Guide Rod/Pillow Block - Stratasys FORTUS 360mc Service Manual

Z Guide Rod/Pillow Block

Caution: Remove/replace one guide rod at a time. Do not have more
than one guide rod removed from the system at one time. Guide rods
must be replaced in pairs. If one guide rod on a side is replaced, the
other guide rod on the same side must be replaced.
Figure 5-43: Guide Rod Assembly Component Locations
Rod End Support
Guide Rod
Pillow Block
Z Stage
End Plate
FORTUS 360mc/400mc Service Manual
Rod End Support
Clamp Screws
Grease Fittings
(4X)
Rod End Support
Mounting Screws (8X)
5-63