Specifications; System Specifications - Stratasys FORTUS 360mc Service Manual

Specifications

System Specifications

Envelope Size
Material Bays
Model Materials
Available Tips (Slice
Heights)
Support Structures
Accuracy
Compatibility
Network Communication
Power Requirements
Size
Weight
FORTUS 360mc/400mc Service Manual
Vantage i Vantage X
(initial) (Xa and Xp)
14 x 10 x 10 in 14 x 10 x 10 in
355 x 254 x 355 x 254 x
254 mm 254 mm
1 model 1 model
1 support 1 support
ABS or PC Xa: ABS, ABSi,
& PC-ABS
Xp: PC-ABS,
PC & PC-ISO
For ALL materials:
plus
For ABS, ABSi,
PC-ABS:
plus
For ABS and ABSi:
Water soluble release supports for ABS, ABSi, PC-ABS. BASS
breakaway support for PC-ISO and PPSF.
Models are produced within an accuracy of ±0.005 inch (±.127 mm)
up to 5 inches (127 mm). Accuracy on models greater than 5 inches
(127 mm) is ±0.0015 inch per inch (±0.0381 mm)
Windows NT 4.0, Windows 2000, Windows XP
10/100 base T connection. Ethernet protocol.
230 VAC 50/60 Hz, 3 phase, 16A/phase (20A dedicated circuit
required).
Vantage: 50.24 in. (1277 mm) wide x 34.4 in. (874 mm) deep x 76.75
in. (1950 mm) high
Titan: 50.25 in. (1277 mm) wide x 34.75 in. (883 mm) deep x 78 in.
(1981 mm) high
1600 pounds (726 kg) shipping weight
Vantage S
(speed)
14 x 10 x 10 in 16 x 14 x 16 in
355 x 254 x 406 x 355 x
254 mm 406 mm
1 model
1 support
ABS, ABSi, ABS, ABSi,
PC-ABS, PC
& PC-ISO
T12/.007 in (.178 mm) and T16/.010 in (.254 mm)
T10/0.005 in (.127 mm)
T20/0.013 in (.330 mm)
Vantage SE
(speed +
envelope) Titan
16 x 14 x 16 in
406 x 355 x
406 mm
2 model 2 model
2 support 2 support
ABS, ABSi,
PC-ABS, PC PC-ABS, PC,
& PC-ISO PC-ISO, &
PPSF
TM
10-3