Modeler Set-Up - Stratasys FORTUS 360mc Service Manual

Modeler Set-Up

Configure the Modeler
1.
Click the Modeler button located in the Modeler Setup window (right side of screen) of
the Operations Panel.
• The Configure Modeler dialog box opens. (See
• Select the modeler from the Modeler Field.
• Select a modeling material - the Support Material field will be
• Select a model tip size - the Support Tip field and Slice Height field will be
FORTUS 360mc/400mc Service Manual
Figure 4-2: Modeler Button
The Modeler Setup window can also be accessed by selecting
Modelers > Setup.
automatically populated.
automatically populated.
Modeler Button
(Figure 4-3 on page 4-4)).
4-3