Liquefier Tip Specifications - Stratasys FORTUS 360mc Service Manual

Liquefier Tip Specifications

1.
General Information
A.
B.
C.
D.
E.
Model Material
ABS-M30
ASA
PC-ABS
PC
Nylon 12
FORTUS 360mc/400mc Service Manual
The head assembly uses a support liquefier tip and a model
liquefier tip.
There are four tip sizes available - T10, T12, T16, and T20.
For soluble support material:
• For Fortus using SR20: Use the T12 SR20 tip for support when
using modeling tips T10, T12, T16, and T20.
• For Fortus using SR30 with ABS-M30: Use the T12 SR30 tip for
support when using modeling tips T10, T12, T16, and T20 with
SR30.
• For Fortus using SR-110 with Nylon 12: Use the T12 SR100 tip
for support when using modeling tips T12, T16, and T20 with
SR-110.
For breakaway support material use standard tips of matching size
for model and support, except for T20 model which uses T16
support.
For Fortus 360mc systems -
and tips. Table 2-2 shows the tip life.
Table 2-1: Fortus 360mc Available Tips
Model Tip
T10, T12,T16, T20
T10, T12,T16, T20
T10, T12,T16, T20
T10
T12
T16
T20
T12, T16, T20
Table 2-1 shows the available material
Support Material Support Tip
SR20
SR30
SR30
SR20
SR-100
PC_S
SR-100
PC_S
SR-100
PC_S
SR-110
T12SR20
T12SR30
T12SR30
T12SR20
T12SR100
T12
T12SR100
T16
T12SR100
T16
T12SR100
2-4