Modeler Status - Stratasys FORTUS 360mc Service Manual

3-Calibrate
FORTUS 360mc/400mc Service Manual
6-Select Calibration Part Position (if user placement
on)
>Load and Calibrate..
7-Locate Part Start
6-The following screens display automatically:
* Waiting h:mm to stabilize
** Actual 100°C
>Unlock Door <E>
*
*Job: Calibration Job
*Build Time:
*PC
>Modeler Status..
>Set Z Stage Zero..
AutoCal Tips <E>
Tip Offset Value..
AutoHome XYZ <E>
4-Set Z Stage Zero
>Manual Z Zero <E>
Modify Current Z Zero..
Auto Z Zero Calibrate <E>
Locate Part Start..
Demo Bounding Box
*** Use the 2, 4,6, 8 Keys ***
Press 1: Coarse Move: 1.000 in
Press 0: Fine Move: 0.100 in
*** Press Enter to Set New XY Start ***
Setpoint: 225°C
Calibrate Immediately <E>
Tip to Tip Calibration Activity
Please Wait...
0:04 hr of 0:08 hr
0.1 in3
| Calibration Job <E>
<E>
| Vacuum On
(Building)
PC_S 0.0
0.010 of 0.050 in
*
4-14