Operator Power Down/Power Up
Operator Power Down
Warning: When in the operator power down state, there is still
voltage present in the system.
Procedure
1.
Press the 'Power Off' button (red button) on the system front panel.
2.
Once the display goes blank and the green start button starts flashing the system is in the
operator power down state.
Operator Power Up
If the system was powered down using the Operator Power Down
procedure, use the Operator Power Up procedure. If the system was
powered down using the System Power Down procedure, use the
System Power Up procedure.
Procedure
1.
Press the Power On button (green button) on system front panel.
2.
The system will power up in approximately 5 minutes or less.
FORTUS 360mc/400mc Service Manual
5-10