Removal And Replacement; Oven Door Window; Oven Door Window Removal - Stratasys FORTUS 360mc Service Manual

Removal and Replacement

Oven Door Window

Oven Door Window Removal

Tools and Materials Required
• Set of basic service tools.
Procedure
For Vantage: Remove Outer Glass Panel
1.
Shut down the system. (See
2.
Open the oven door.
3.
Loosen and remove the upper, outer-glass clamp screw (9/64-inch hex key) and clamp.
4.
Gently close the oven door.
5.
Slide the blade of a small, flat blade screwdriver between the 'hook and lock' strips at
each corner of the door while pulling the outer-glass away from the door.
FORTUS 360mc/400mc Service Manual
"System Power Down/Power Up" on page
Caution: Support outer glass against door when removing upper,
outer-glass clamp. the 'hook and lock' (velcro) strips that attach the
outer-glass to the door may be loose.
Caution: Support the front of glass while removing it from the door.
the lower edge is supported by the lower glass clamps.
Figure 10-2: Vantage Oven Door Glass
(Figure 10-2).
5-8.)
10-10