Electronic Components
Display Panel
Display Panel Removal
Tools and Materials Required
• 11/32-inch open wrench
Procedure
1.
Power down the system. (See
2.
Remove the right side panels. (See
3.
Disconnect the display interface cable from the display assembly.
4.
Remove the four display mounting nuts from the back of the display assembly (11/32-
inch open end wrench).
5.
Remove the display assembly.
Display Mounting Nuts
FORTUS 360mc/400mc Service Manual
"System Power Down" on page
"Panel Removal" on page
Figure 5-50: Display Panel Removal
5-8.)
5-6.)
5-74