Computer; Computer Removal - Stratasys FORTUS 360mc Service Manual

Computer

Computer Removal

Tools and Materials Required
• Set of basic service tools
Prerequisite Procedures
• Power down the system. (See
• Remove the left side panels. (See
Procedure
1.
Disconnect cables and power cord from back of computer.
2.
Loosen (do not remove) four computer mounting screws (9/64-inch hex key).
3.
Remove computer from the system.
A.
B.
FORTUS 360mc/400mc Service Manual
"System Power Down/Power Up" on page
Slide the computer to the back of the modeler until the mounting
screw heads are positioned within the large opening of the keyhole
slots.
Carefully lift the computer away from the mount.
"Panel Removal" on page
5-8.)
5-6.)
10-30