Computer; Computer Removal - Stratasys FORTUS 360mc Service Manual

Computer

Computer Removal

Tools and Materials Required
• 9/64-inch hex key
Procedure
1.
Power down the system. (See
2.
Remove the lower right side panel. (See
3.
Disconnect the cables and power cord from back of computer.
4.
Loosen, but do not remove, the four computer mounting screws
(9/64-inch hex key).
5.
Remove the computer from the system by sliding the computer toward the back of the
system and then carefully lift the computer out of the system.
FORTUS 360mc/400mc Service Manual
"System Power Down" on page
"Panel Removal" on page
Figure 5-55: Computer Connections
PMD A
PIC Serial Cable
UPS
5-8.)
5-6.)
PMD B
Ethernet Cable
UPS Comm
Cable
Mounting Screws
Net
(4X)
5-85