Safety; Safe Environment; Safe Human Interface; Hazard Classifications - Stratasys FORTUS 360mc Service Manual

Safety

The following basic safety tips are given to ensure safe installation,
operation, and maintenance of Stratasys equipment and are not to be
considered as comprehensive on matters of safety. The Fortus 360mc/
400mc system is designed to be safe and reliable rapid prototyping
system. Access to areas of the system are potentially dangerous.

Safe Environment

• Connect equipment to a grounded facility power source. Do not defeat
or bypass the ground lead.
• Know the location of equipment branch circuit interrupters or circuit
breakers and how to turn them on and off in case of emergency.
• Know the location of fire extinguishers and how to use them. Use only
ABC type extinguishers on electrical fires.
• Know local procedures for first aid and emergency assistance at the
customer facility.
• Use adequate lighting at the equipment.
• Maintain the recommended range of temperature and humidity in
equipment area.
• Do not use this product in an environment containing volatile or
flammable compounds.

Safe Human Interface

• Use proper lifting techniques when moving or installing the
equipment.
• Use standard electrostatic discharge (ESD) precautions when working
on or near electrical circuits.

Hazard Classifications

Be aware of the following hazard classification used in this manual.
Caution: Indicates a potentially hazardous situation that may result in
minor or moderate injury.
Warning: Indicates a potentially hazardous situation that may result in
death or serious injury.
Note: Always read and adhere to safety statements, and be aware of the
following safety signs located on the system.
xiii