Internal Air Compressor; Internal Air Compressor Removal - Stratasys FORTUS 360mc Service Manual

Internal Air Compressor

Internal Air Compressor Removal

Tools and Materials
• 7/16-inch wrench
Removal Procedure
1.
Power down the system. (See
2.
Remove the upper and lower left side panels. (See
3.
Disconnect the electrical harness from the compressor.
4.
Disconnect the air tubes from the quick disconnect compressor fitting.
5.
Remove the four air compressor mounting nuts (7/16-inch wrench) from the underside
of the mounting bracket.
6.
Remove the compressor from the system.
Air Tube Connection
Electrical Connection
FORTUS 360mc/400mc Service Manual
"System Power Down" on page
Figure 5-83: Air Compressor
5-8.)
"Panel Removal" on page 5-6.)
5-120