Delete A Partition - Spectra Logic Spectra T950V User Manual

Chapter 6 — Configuring and Managing Partitions

Delete a Partition

Use the following steps to delete an existing partition.
1. Log in as a user with superuser or administrator privileges.
2. Select Maintenance > Media Lifecycle Management to display the
3. From the toolbar menu, select Configuration > Partitions. The Shared
4. Click Delete for the partition you want to delete. A Feedback Required
5. Select whether you want to save the current library configuration.
6. Click Ok to confirm that you want to delete the partition.
August 2019
Media Lifecycle Management Tools screen. If Media Auto Discovery,
PreScan, or PostScan is running (as indicated by the presence of a Stop
Discovery or Pause PostScan button, respectively), do the following:
 Click Stop Discovery to temporarily stop Media Auto Discovery or
PreScan (see Figure 138 on page 266).
 Click Pause PostScan to pause the PostScan for one hour (see
Figure 141 on page 275).
Library Services screen displays.
screen displays.
 Don't Save Library Configuration — A backup of the changed library
configuration is not saved.
 Save Library Configuration To (highly recommended) — S aves a
backup file of the changed library configuration to either a USB
device connected to the library or as an attachment to an email sent
to a previously configured recipient (see Configure Mail Users on
page 107). Using this option is highly recommended to ensure that
you can easily restore the library configuration if necessary.
Note: If you want to save the configuration to a USB device, connect it
to a USB port on the LCM or the operator panel and allow time
for the device to mount before continuing.
The screen refreshes and the deleted partition is no longer listed on the
Shared Library Services screen.
User Guide—Spectra T950 Library
Deleting a Partition
197