Specify The Partition Users; Configure The Robotic Path Visibility - Spectra Logic Spectra T950V User Manual

Chapter 6 — Configuring and Managing Partitions

Specify the Partition Users

1. From the Fibre Channel Loop ID's screen, click Next. The Partition
2. Select the users who are allowed access to this partition. Only users
If you are using a tape drive to provide the robotic control path, this is the last
Important
partition configuration screen. Skip to
on page

Configure the Robotic Path Visibility

Robotic path visibility determines whether one or both of the Fibre
Channel ports on the exporting controller provide the robotic control path.
August 2019
Users screen displays.
Figure 94 Select which users can access the partition.
who were previously configured can be selected (see Configuring
Library Users on page 91).
 All of the users who are configured with operator privileges
Notes:
are listed under Allow only. Select one or more of these users
to enable partition‐based security for operators.
 If you did not configure additional Operator level users, you
can do so later and then edit the partition to give them access.
 Superusers and administrators always have full access to all
partitions.
189.
Creating a Storage Partition
Confirming and Saving the Partition Settings
User Guide—Spectra T950 Library
186