Spectra Logic Spectra T950V User Manual page 104

Chapter 4 — Configuring the Library
Setting
Syslog Server IP
Address
Network Settings
Mail User
Auto Configuration
Save
Routine
Maintenance
Date And Time
August 2019
Description
Enter the IP address of an external Syslog server used to
collect the system messages posted by the library. See Use
Syslog on page 149 for information about what the Syslog
messages contain.
1. Enter a valid IPv4 or IPv6 address for the Syslog server
(or clear the IP address to disable the option). Do not
include http: or https:.
2. Click Save.
The library immediately begins forwarding all system
messages to the server at the specified IP address.
Set the IP addressing for the LCM Ethernet port. You can
also configure up to two DNS IP addresses for use with the
NTP service. See Configure Network Settings on page 105
for detailed information and instructions.
Note: Depending on how you are accessing the library, the
status bar shows:
 The Network Settings icon when you access the library
using the touch screen or a direct connection to the LCM.
 The library's name, if set, when you are accessing the
library using the BlueScale web interface through a web
browser connection.
Configure recipients for emails containing system
messages, traces, and diagnostic results generated by the
library. See Configure Mail Users on page 107 for detailed
information and instructions.
Enable or disable sending the Auto Configuration Save file
to a previously configured mail recipient. See Enable Email
for the Auto Configuration Save File on page 109 for
detailed information about this option and instructions for
configuring it.
Note: The Auto Configuration Save file is always
generated, regardless of the setting for this option. See Use
Automatic Backup of the Library Configuration on
page 137 for information about the Auto Configuration
Save file.
Enable or disable the routine maintenance option for the
LCM operating system. See Configure Routine
Maintenance on page 116 for detailed information about
this option and instructions for configuring it.
See Set the Date and Time on page 111 for detailed
information and instructions for setting the date and time.
Configuring the Global System Settings
User Guide—Spectra T950V Library
Default
Cleared
(Disabled)
Dynamic

autosupport@
spectralogic.com
Cleared
(Disabled)
Cleared
(Disabled)
Date and time
for the Mountain
time zone (US
and Canada)
104