Chapter 4 — Configuring the Library
The following table describes the three user groups and the privileges of
each. By default, passwords are not required for any of the three default
users.
User Group Type
Superuser
Administrator
Operator
Add a New User
Use the following steps to add a new library user and assign that user to a
user group.
1.
August 2019
Description
Controls all aspects of the library's configuration and
operation, including defining other library users and
assigning them to a user‐privilege group.
Notes:
The library requires a minimum of one superuser. You
cannot delete the last member of the Superuser group.
Only a user with superuser privileges can add, modify,
or delete users.
Only a user with superuser privileges can access and
configure encryption features.
Only a user with superuser privileges can use the Soft
Power feature.
Only a user with superuser privileges can enable or
disable the Enable Automatic Power‐Up After Power
Failure feature.
Configures and uses the library. With the exception of
creating or modifying library users, accessing the
encryption features, enabling Automatic Power‐Up After
Power Failure, and using the Soft Power feature, users in
the Administrator group have the same privileges as users
in the Superuser group.
Performs day‐to‐day operations. Users assigned to the
Operator group can move, import, and export media, but
cannot access the more sensitive library operations such as
configuration, diagnostics, and security.
Log into the library as a user with superuser privileges (see Log Into the
User Interface on page 83).
Configuring Library Users
User Guide—Spectra T950V Library
Default User
Name
su
administrator
operator
92