Chapter 8 — Using the Cartridge Inventory
Partition Type
Storage
Cleaning
4. If you are moving a cartridge that is already in the library, locate and
August 2019
If you select Entry/Exit from the Source drop‐down list and
there are cartridges in the entry/exit pool, a Bulk Load button
displays at the bottom of the Inventory screen. Clicking Bulk
Load automatically adds operations to the move queue for
moving each cartridge in the entry/exit pool to an empty slot
in the storage pool.
Available Sources
Storage — L ists the cartridges currently in the selected storage partition's
storage pool.
Entry/Exit — L ists the cartridges currently in the partition's entry/exit pool.
Drives — L ists the drives in the partition that currently contain a cartridge.
From TAP — C onfigures a move that transfers the magazine containing the
destination slot to the TAP so that you can insert a cartridge. The magazine is
then returned to its original location.
All — L ists all of the cartridges in the partition, regardless of location.
Cleaning — L ists the cleaning cartridges currently in the selected cleaning
partition.
From TAP — C onfigures a move that transfers the maintenance magazine
containing the destination slot to the TAP so that you can insert a cartridge.
The magazine is then returned to its original location.
All — L ists all of the cartridges in the partition.
select the cartridge you want to move in the Source list, as described in
Locating a Specific Cartridge on page 233.
Moving Cartridges Within a Partition
User Guide—Spectra T950V Library
235