Spectra Logic Spectra T950V User Manual page 297

Chapter 10 — Using Drive Lifecycle Management
This pane...
History of tapes
5. To save the information on the Drive Lifecycle Management screen, use
6. If you correct a condition that changed the drive's health to yellow or
August 2019
Shows...
Detailed information about the last 50 cartridges loaded into the drive as well as
any Tape Alerts and SCD or MCD codes posted by the drive while the tape was
loaded in the drive.
Figure 158 The History of tapes pane.
Notes:
 Depending on the usage history for the drive, this pane may not have entries.
 For detailed information about Tape Alerts, log on to the portal (see
Accessing the Technical Support Portal on page 447), open the Knowledge
Base, and search for KBA‐01769, What do the tape alert flags in the DLM pages
mean?. Refer to the tape drive documentation for additional information
the Save MLM Database utility as described in Back Up the MLM and
DLM Databases on page 284.
red, click Reset Health to reset the drive health to Good (Green). Click
Continue to complete the reset health process.
 If the condition was not truly corrected, the next tape load
Notes:
sets the drive health back to the previous indication.
 Resetting the drive health deletes the drive's Summary of
Tapes and History of Tapes data.
Monitoring Drive Health Using DLM
User Guide—Spectra T950V Library
297