Spectra Logic Spectra T950V User Manual page 296

Chapter 10 — Using Drive Lifecycle Management
4. Click DLM on the Drive Details screen to view a detailed Drive Lifecycle
This pane...
Drive health
overview
Summary of tapes
August 2019
Management report.
Note: The DLM button on the Drive Details is not present if MLM and
DLM are not enabled (see Enable and Configure MLM PreScan
and PostScan on page 180).
The Drive Lifecycle Management Report screen is divided into three
panes, which are described in the following table.
Shows...
The drive identifier and any status information. The drive health icon indicates
the drive's overall health at the time the screen was displayed.
Figure 156 Check the drive health icon for the overall
health of the drive.
The barcode label information and health information for the last 10 cartridges
loaded into the drive. The health icon indicates the cartridge health at the time
the cartridge was unloaded from the drive (Tape Health at Unmount) and the
current health status stored in the MLM database (Current Tape Health). Refer
to the table on page 278 of Chapter 9 – Configuring and Using Media Lifecycle
Management, beginning on page 245 for descriptions of the icons related to
media health.
Depending on the drive's history, this pane may not have any entries.
Note:
Figure 157 The Summary of tapes pane shows the
barcode label information and health information for the
last 10 cartridges loaded into the drive.
Monitoring Drive Health Using DLM
User Guide—Spectra T950V Library
296