Chapter 3 — Introducing the BlueScale User Interface
5. Click Login. The library's General Status screen displays.
6. If you want to enable encryption or configure encryption settings or
Log Off or Switch Users
1. If a screen other than the Login screen is displayed, select the Security
2. Select Switch User to log out the currently logged in user and redisplay
3. If desired, log in again using the same or a different user name and
August 2019
Note:
If you just powered‐on or reset the library, there may be a delay
after you click Login while the library completes its initialization.
When the initialization is complete, the General Status screen
displays.
Figure 37 The BlueScale user interface General Status screen.
keys, select Security > Encryption to log into the Encryption feature
(see the Spectra Tape Libraries Encryption User Guide for detailed
instructions).
toolbar to display the Security options.
Figure 38 The Security toolbar.
the Login screen.
password.
Using the BlueScale User Interface
Security toolbar
Switch User
User Guide—Spectra T950V Library
87