Spectra Logic Spectra T950V User Manual page 281

Chapter 9 — Configuring and Using Media Lifecycle Management
2. If you want to save the MLM report to a USB device, connect the device
3. Click Save Report to display the Save Media Lifecycle Management
4. Select the data to include in the saved report and how you want the
This option...
Report All Media
Lifecycle Data
Report Selected
Data
Zip Report
August 2019
to a USB port on the LCM or operator panel and allow time for the
device to mount before continuing.
Note: The option to save the report to a USB device is only available if
you connect a USB device to the library before you click Save
Report on the Media Lifecycle Management Report screen.
Report screen.
Figure 145 Select the desired options on the Save Media
Lifecycle Management Report screen.
report saved.
Note: If you want to email the report, the intended recipient must be a
previously configured mail user (see Configure Mail Users on
page 107).
Saves...
A report containing all of the available detailed MLM data for MLM‐enabled
media in the selected location (a specific partition or the total library).
Note: Depending on the number of cartridges in the selected location, this
report can be quite large.
Only the fields displayed in the report that you selected on the Media Lifecycle
Management Report screen (Figure 143 on page 278).
Note: The headings in the saved report reflect the fields displayed in the
report you selected in the Media Lifecycle Management Report screen.
The report as a zip file. Zipping the report is especially useful when emailing
the Report All Media Lifecycle Data report.
Note: If you unzip the report using the standard format used by most file‐
zipping applications, the application creates the following directory structure:
*\hard disk\lc\reports.
Using MLM Reporting
User Guide—Spectra T950 Library
281