Chapter 3 — Introducing the BlueScale User Interface
U
B
SING THE
LUE
The library's BlueScale user interface lets you set configuration options,
view library and drive information and metrics, manage media, and
monitor library operations.
Log Into the User Interface
Before you can manage or configure the library, you must log into the
BlueScale user interface.
After the library completes its power‐on sequence, the Library Initialization
screen displays. This screen lists the required initialization steps and current
status of the library's major components (Robotics, RCM, and LCM). Text
boxes provide descriptions about the currently active tasks.
Active task
Completed task
Completed task
Task description(s)
Task not started
Figure 33 The Library Initialization screen.
August 2019
S
U
CALE
SER
Unless otherwise specified, references to the user interface screens
Note:
apply to both the touch screen on the library operator panel and
the screens presented through the BlueScale web interface.
If your library has a static IP address, you can access the
Notes:
library using the BlueScale web interface (RLC) as soon as the
Library Initialization screen displays
If the library cannot complete the initialization process, it
generates system messages and enters maintenance mode.
Contact Spectra Logic Technical Support for assistance.
Using the BlueScale User Interface
I
NTERFACE
User Guide—Spectra T950V Library
83