Table of Contents
Advertisement
Chapter 4 — Configuring the Library
3. Enter the activation key for the option you want to enable in the Key
4. Click Save. The System Setup screen refreshes and displays the new
Add Options
This section describes how to determine the Hardware ID and obtain
activation keys for new options after the initial installation. See Renewing
the BlueScale Software Support Key on page 389 if you need to renew or
extend your service contract, which includes the BlueScale Software
Support key.
The BlueScale Software Support key and all option activation keys are tied to the
Important
library serial number. If you have multiple libraries, you need separate activation
keys for each library.
Determine the Library Serial Number
The library serial number (Hardware ID) is required for renewing or
extending your service contract, which includes the BlueScale Software
Support key, and for purchasing additional Capacity on Demand (CoD) or
other upgrade options.
Use the following steps to determine your library's serial number.
1.
2. Make a note of the library's serial number (Hardware ID), which is
August 2019
Enabling BlueScale Software Support, Options, and Upgrades
field.
Note:
The activation keys are not case‐sensitive.
activation key and its description in the list of keys. The option is
available for immediate use.
Keep a record of all activation keys listed on the Option
Note:
Enablement pane of the System Setup screen. You need to
re‐enter them if the library is reset to factory defaults.
Access the System Setup screen (see Accessing the System Setup Screen
on page 94).
needed to generate the activation keys.
Figure 43 Locate the library's serial number (Hardware ID).
The library's hardware ID
User Guide—Spectra T950V Library
99
Advertisement
Table of Contents
Troubleshooting
