Spectra Logic Spectra T950V User Manual page 237

Chapter 8 — Using the Cartridge Inventory
Partition Type
Cleaning
6. If you are moving a cartridge to a slot, locate and select the desired slot
7. Click Add Move.
Figure 125 Add the move to the Move Queue.
8. Repeat Step 3 on page 234 through Step 7 on this page for each
August 2019
Available Destinations
 Cleaning — L ists all of the empty slots in the selected cleaning partition.
 To TAP — C onfigures a move that transfers the maintenance magazine
containing the source slot to the TAP so that you can remove or replace the
cleaning cartridge from the specified slot. The magazine is then returned to its
original location.
 All — L ist all available destinations in the partition, regardless of the type.
Note: Selecting a specific destination type instead of using All displays fewer
items through which you must scroll to locate the desired destination slot.
in the Destination list.
An entry listing the move you just defined appears in the Move Queue
list.
additional cartridge you want to move.
Note: If you want to remove one or more of the moves in the queue:
 Select the move and click Delete to remove it from the Move
Queue list.
 Click Delete All to remove all of the defined moves from the
Move Queue list.
Moving Cartridges Within a Partition
Click Add Move to add the
defined move to the Move
Queue.
User Guide—Spectra T950V Library
237