Configure How Storage Capacity Displays - Spectra Logic Spectra T950V User Manual

Tape library

Hide thumbs Also See for Spectra T950V:

Table of Contents

Chapter 9 — Configuring and Using Media Lifecycle Management

Configure How Storage Capacity Displays

By default, the General Status screen shows the raw storage capacity for all

MLM‐enabled cartridges in the selected partition. If desired, you can

configure the library to use a broadcast‐centric method for displaying the

storage capacity in terms of hours of content used and total hours of

content available.

1. Log into the library as a user with superuser or administrator

2. From the toolbar menu, select Configuration > Media Lifecycle

3. Select the method for converting to broadcast capacity from the Convert

If you select None in the Convert to Broadcast Hours field, leave the Override

Broadcast Bit Rate value set to 0.

Management. The Media Lifecycle Management Settings screen

displays (see Figure 130 on page 256).

to Broadcast Hours drop‐down list.

To return to displaying raw capacity, select None.

Figure 131 Select the conversion settings on the Convert to

Broadcast Hours drop-down list.

Enabling MLM and Configuring Global

User Guide—Spectra T950 Library