Chapter 12 — Library Troubleshooting
7. Click Run Utility.
8. Click Previous to return to the list of advanced utilities.
C
T
APTURING
RACES
Overview Spectra Logic uses traces to help diagnose problems with the
library. You only need to capture traces when instructed to do so by
Spectra Logic Technical Support. They tell you what type of trace you need
to capture.
Emailing Trace Results If you plan to email trace results directly from the
library, make sure that you set up the recipients as mail users (see
Configure Mail Users on page 107).
If you are connected to the library using a web browser, you can also copy
and paste the trace results into a text file and email it to Spectra Logic
Technical Support if they request it.
Saving Trace Results to a USB Device If you plan to save trace results to a
USB device, you must connect the USB device to the LCM or the operator
panel and allow time for the device to mount before you select Traces on
the Maintenance Tools screen (see Connect a USB Device to the Library on
page 159). If a USB device is not connected, the USB option is not available.
You can, however, still save trace results to the memory card in the LCM.
You can also view the results without saving them.
August 2019
After a brief delay, the Utility Results screen displays the current HHM
data. Scroll as necessary to view all of the data.
Figure 182 The HHM: View Data Utility Results screen.
User Guide—Spectra T950V Library
Capturing Traces
332