Spectra Logic Spectra T950V User Manual page 210

Chapter 7 — Importing and Exporting Cartridges
Insert the magazine so that
the textured surface on
each side is toward the
outside of the library.
Figure 110 Insert a magazine into the TAP, making sure that it is correctly oriented.
Select...
Continue
Stop Importing
August 2019
a. Insert a magazine into the tray on the open TAP, making sure that it
is oriented with the textured surface on each side toward the
outside of the library, as shown in Figure 110.
b. Return to the operator panel and select the appropriate option on
the Feedback Required screen.
Note: If you wait more than 10 minutes to respond, the library times
out and displays a message on the operator panel. The TAP door
is left open.
If...
You plan to import another magazine after the one currently in the TAP. The
import process continues as follows:
1. The TAP door closes automatically. The library retrieves the magazine from
the TAP and moves it to a chamber in the selected destination.
2. If there are still empty chambers available in the selected destination, the
TAP door opens, ready to accept the next magazine.
3. The import process continues as long as there are empty chambers available
or until you click Stop Importing on the Feedback Required screen. Continue
to insert magazines into the TAP, clicking Continue after each one. When
there are no empty chambers remaining in the selected destination, the
process stops automatically and the Import/Export TeraPack Magazines
screen displays.
The magazine you placed in the TAP is the last one you want to import.
Importing into a Storage or Cleaning Partition
User Guide—Spectra T950V Library
210