Spectra Logic Spectra T950V User Manual page 194

Chapter 6 — Configuring and Managing Partitions
3. If you configured the partition to use encryption or if you want to
4. From the toolbar menu, select Configuration > Partitions to begin the
August 2019
enable encryption in a partition that did not previously use it, select
Security > Encryption to log into the encryption feature. The
Encryption User Login screen displays.
Click Encryption to
display the Encryption
User Login screen.
Figure 101 Log into the Encryption feature if you need to
change the encryption setting for the partition.
a. Type the encryption user password, if one is set. Otherwise, leave
the password blank.
b. Click OK to display the Encryption Configuration screen.
After you log into the encryption feature, you can modify the
encryption settings for the partition (see Select the Encryption Mode
on page 183). You can also configure encryption settings and
manage BlueScale encryption keys. See the Spectra Tape Libraries
Encryption User Guide for detailed information about enabling and
configuring encryption for a partition.
partition configuration process. The Shared Library Services screen
displays.
Figure 102 The Shared Library Services screen.
Modifying an Existing Partition
User Guide—Spectra T950 Library
194