Chapter 4 — Configuring the Library
4. Enter the following information on the SNMP Settings screen.
Field
System Contact
System Location
Valid Query
Communities
Trap Destinations
5. Click Previous to return to the System Configuration screen.
August 2019
Description
Maps to the value for system.4 (sysContact) object in the MIB. Enter the
informations and click Save.
Maps to the value for system.6 (sysLocation) object in the MIB. Enter the
informations and click Save.
Lists all SNMP communities to which the library currently belongs. The library
only responds to SNMP queries from members of these communities. The
default valid query community is public.
Click Edit next to the setting you need to modify. The current settings display
in the corresponding Add/Update section of the screen. Click Save in the
corresponding Add/Update section of the screen after you make your
changes.
Important:
Community strings are case sensitive. If the library is configured to
include the community called "OurCommunity, " it answers to queries from
OurCommunity but not from a community called "ourcommunity. "
Click Delete to remove a setting.
Lists all the currently configured trap destinations (IPv4 or IPv6 addresses) to
which the library sends SNMP traps. There are no default trap destinations
configured.
Note:
Only one community at a time may contain IPv6 addresses.
Click Edit next to the setting you need to modify. The current settings display
in the corresponding Add/Update section of the screen. Click Save in the
corresponding Add/Update section of the screen after you make your
changes.
Click Delete to remove a setting.
Configuring Optional Library Settings
User Guide—Spectra T950V Library
119